; "UV Sunblock by Forcefield 22 oz.")
Actual colors may vary depending on individual monitor settings
Code: UVSUNB
Force Field Out-Performs All Other Products in Their Class.
UV SunBlock™ is designed to help prevent the fading of colors and the degradation that can result when fiber surfaces are exposed to the sun’s damaging ultra-violet rays. Ideal for a wide range of applications: drapes, tapestries, rugs, carpets, patio furniture, upholstery, sheers, clothing, auto interiors, and more. Treated surfaces retain color vibrancy and maintain a new appearance longer. UV SunBlock™ is perfect for use on indoor and outdoor surfaces, and is effective on natural, synthetic, and blended fibers.
• Helps Prevent Fabric Fading
• Protects Against Damaging UV Rays
• Actually Absorbs the Sun’s Rays
• Works Well With Mill Treatments
• Safe On All Materials; Dries Fast
• Use On: Draperies, Upholstery & Rugs
How & Why UV Sunblock™ Works:
More than just blocking the sun’s ultra-violet rays, UV SunBlock™ actually protects fiber surfaces by absorbing the energy from these damaging rays and then releasing it back out in a harmless form. UV SunBlock™ stops UV rays at the surface, preventing them from reaching the protected surfaces.
Applications:
Always test for compatibility by applying UV SunBlock™ to an inconspicuous area of the surface to be treated. For best results, apply to new or clean surfaces. As this is a solvent-based product, exercise proper caution by applying either outdoors, or in a well-ventilated area. Do not spray near flame, sparks, heated surfaces, or other potential sources of ignition. Avoid excessive airborne mist. Do not apply using high-pressure spraying equipment. Holding the sprayer 6 to 12 inches away from the surface to be treated, spray a sufficient quantity of UV SunBlock™ to evenly wet the surface. Recommended coverage is 1 ounce per 8 to 10 square feet of surface. Treated surfaces are dry to the touch in 2 to 4 hours and completely cured in 24 hours.
For applications where both UV and soil/stain protection are desired, UV SunBlock™ can be used in conjunction with ForceField® Fabric Protector. While order of application is not critical, we suggest that UV SunBlock™ be applied first.
Made in USA
Washing Instructions & Info
As a general rule, unless stated otherwise, home decorator products are recommended to be dry cleaned. This does not mean they will not wash well... It just means to wash at your own risk. If you intend to wash an item after it has been made, we strongly encourage you to test a small piece first to make sure it is suitable for washing; and if you are satisfied with the result, then proceed with washing the entire yardage. Also remember to wash the product in the same manner you will wash the project afterwards (i.e. Do not wash in a warmer temp. after your project has been made and do not dry in dryer if the initial yardage was not dried in dryer).
Please Note: We are providing this information as a customer service. If you choose to wash your materials, we strongly encourage a pre-wash test. And per our Return Policy: Returns are not accepted if washed or cut... So if it is vital that your material is washable, we recommend ordering a SAMPLE for your pre-wash test.
Satisfaction Guaranteed!
We want your shopping experience with us to be as pleasurable and hassle free as possible. If you are unsatisfied for any reason, please return your unaltered order within 30 days of the original ship date for a full refund minus the original shipping charge.
To ensure a simple return process, please follow the policy guidelines listed below. There is no need to contact us before returning an order unless a return is needed due to defective merchandise or an error on our part. If this is the case, please click here to contact us.
Policy Guidelines & Information
Ship or mail returns to:
Warehouse Fabrics Inc
Attn: Returns
1726 US Hwy 43
Winfield, AL 35594
